The traffic light smart zebra crossing solution consists of three parts: traffic lights, host controller, and solar wireless synchronous spike lights (or floor tile lights). When the pedestrian traffic light automatically switches to red or green, the host controller will automatically and immediately send a wireless signal, triggering the solar wireless flashing road stud at the current intersection to light up the red or green light together. At the same time, solar wireless synchronized signage, solar energy, etc. can also be added. Wireless synchronized yellow flashing light (or yellow flashing red slow light), pedestrian crossing button, LED dot matrix prompt display, voice broadcast prompts, etc.
Features
- Adaptable to any kind of traffic light, the host is reserved for three interfaces of red light wire, green light wire and power wire, which is extremely easy to install, in addition, it is also reserved for solar panel interface.
- Traffic light host controller can automatically look for road studs: when the wireless studs are out of power or need to replace the new solar studs, the host will automatically give a signal to look for the current studs, so as to realize the synchronization of traffic light signals with the newly installed studs red and green flashing lights.
- Red and green lights connected to the host controller, automatic wireless transmission of synchronized red and green signals to the solar wireless synchronization studs, so that there is no delay in the automatic switching synchronization of the red flash or green light, but also can be added to the LED dot-matrix display, solar signs, solar wireless synchronization of the yellow flashing lights and so on, so that it is linked to the display of the reminder.
- The blinking method of solar wireless synchronized road studs can be customized, and parameters such as lighting time and blinking frequency can be changed according to customers' requirements.
- For the case of solar road studs with LEDs on all four sides, the sidewalk signal shows a green light, the solar road studs on the crosswalk (LEDs in the direction of pedestrians) synchronously flash a green light, prompting pedestrians to pass, and the solar road studs on the crosswalk (LEDs in the direction of traffic) synchronously flash a red light, suggesting that incoming traffic is waiting to pass.
- For the case of solar road studs with LEDs on all four sides, the sidewalk signal light shows red, the solar road studs on the crosswalk (LEDs in the direction of pedestrians) synchronously flash red, prompting pedestrians to wait for the passage of the crosswalk, the solar road studs on the crosswalk (LEDs in the direction of the traffic) synchronously flash green, suggesting that incoming traffic can pass.
- For solar studs on both sides (opposite side) with LED, if it is installed for the pedestrian direction, when the traffic light shows red, solar with flash studs light red, prompting pedestrians to wait for passage; when the traffic light shows green, solar with flash studs light green, prompting pedestrians can pass.
- For solar studs on both sides (opposite side) with LED, if it is installed for the direction of traffic, when the pedestrian traffic light shows red, solar with flash studs light green, suggesting that the car can pass; when the pedestrian traffic light shows green, solar with flash studs light red, suggesting that the car waiting to pass.
- In the face of the low head to look at the cell phone a family, can be installed in its waiting area, a row of solar studs or tile lights, follow the pedestrian traffic lights automatically wireless synchronization conversion of red or green lights, the same principle as above.
- Solar road nail single product failure will not affect the normal work of other equipment, newly installed road nails will automatically synchronize with the adjacent road nails flashing lights, no need to dig and bury the power cord, greatly reducing the difficulty of construction.
- As each group of traffic light host controller has its own unique channel code and ID code, so the solar energy wireless synchronization studs will not be subject to the external environment, the surrounding radio, adjacent intersections, traffic light host signal interference, etc., to avoid the shortcomings of the previous wireless synchronization products susceptible to interference.
Our products available for this project
- Traffic Light Host Controller (for any traffic light);
- Solar Wireless Synchronized Spike (single or dual color) control board;
- Solar powered wireless synchronized signage or warning light control board;
- LED dot matrix display trigger control board;
- Solar wireless synchronized yellow flashing light (yellow flashing red slow light) control board;
- Pedestrian crossing button wireless trigger control board;
- Voice broadcast prompts wireless trigger control panel;
- Relevant hardware and software support and customized development are available.
